Nordson Spectrum II S2-900 C Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 164 / 262

6-4 Maintenance
6.5.1 Replacing Purge and Scale Station Cups
The cups in the purge and scale stations should be replaced at the intervals recommended in Table 6-1.
To replace the purge and scale cups:
WARNING! Follow all local regulations, the material manufacturer SDS, and facility practices
concerning personal protective equipment and disposal of hazardous materials.

NOTE The Fluidmove Valve Offsets routine does not need to be performed after replacing the
purge station and scale station cups.
1. When the dispensing system is idle, open the dispensing system hatch.
2. Remove the covers on the purge station and scale stations (Figure 6-1).
3. Remove and discard the plastic cups inside the purge and scale stations and inspect the
interior surfaces for spilled fluid.

If the interior of the purge station has spilled fluid, clean with the recommended
cleaning agent and a soft cloth.

If the interior of the scale station has spilled fluid, call a service technician.
CAUTION! Avoid putting downward pressure on the scale or damage to the sensitive
weighing mechanism will occur.
4. Place a new plastic cup inside of each station.
5. Clean the covers using isopropyl alcohol and a soft cloth.
6. Reinstall the covers and close the hatch.