Nordson Spectrum II S2-900 C Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 117 / 262

Operation 4-45
1 FIND SUBSTRATE HEIGHT: (X, Y)
2 DO: Lines AT (2.450, 1.297)
3 END:
3
Sample Workpiece
Sample
Lines
1. MOVE TO LOCATION: PURGE
2. Line: 1, Start: (0.000, -0.036), End: (0.407, -0.036)
3. Line: 1, Start: (0.407, -0.036), End: (0.407, -0.274)
4. WEIGHT CONTROL: 10.000, 1, …
5. END
5
Figure 4-41 Placing a Pattern
4.10.12 Saving the Program
To save the program:
1. Select
File > Save or Save
as in the Programming Window.

The Save Window opens (Figure 4-42).
Figure 4-42 Save Program
2. Enter the program name.
3. Select
Attach Fluid File
and
Attach Heater File
(if program requires heat).

The fluid and heater files will be automatically be loaded with the program. This
ensures that the correct files are loaded when you open the program.
4. Click on
Save
.