manualshive.com logo in svg

Nordson SCH-1, Руководство по эксплуатации продукта

Поделиться
Скачать
Nordson SCH-1 Скачать руководство пользователя страница 24

Model SCH-1 Heater

20

1999 Nordson Corporation

All rights reserved

108 151D

Issued 8/99

Manual 12-11

Fluid Passage Body

1. Remove the retaining rings from the fluid passage body.

2. Place a wooden block on a hard surface.  Grasping the reservoir

assembly firmly, strike the top of the surface of the fluid passage body
against the wood block until the lower O-ring is exposed.

3. Remove the lower O-ring, turn the reservoir assembly right side up

and strike against the wood block until the upper O-ring is exposed.
Remove the upper O-ring.

4. Use the wood block as a driver to force the fluid passage body out of

the housing.

Fluid Passage Body Installation

CAUTION:  When cleaning the fluid passage body, be careful
not to damage the nickel plating on the spiral grooves.

1. Soak the fluid passage body in a suitable solvent until any hardened

coating material has softened.  Use a blunt instrument such as a thin
piece of wood, or similar object, to clean the spiral grooves.

2. Install new O-rings onto the fluid passage body.

3. Install the fluid passage body into the housing and secure with the

retaining ring.

Содержание SCH-1



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды