Model SCH-1 Heater
6
1999 Nordson Corporation
All rights reserved
108 151D
Issued 8/99
Manual 12-11
See Figure 1. The Nordson SCH-1 heater is an electrically operated,
digitally controlled high-pressure fluid heater designed for use with the
Select Coat system. Maximum operating pressure is 241 bar (3500 psi),
although the Select Coat system requires much lower operating
pressures below 5.9 bar (85 psi).
The heater can raise an ambient material temperature of 18.3
°
C (65
°
F)
to 83
°
C (190
°
F). Refer to
Specifications for more information.
The standard SCH-1 heater has an electroless nickel-plated brass
reservoir and fluid passage body (4). The heater is mounted at the back
of the workcell, near the fluid pump and consists of an electrical
enclosure (5) and a fluid-heating reservoir.
A platinum RTD is used to provide temperature feedback from the fluid
passage body to an adjustable digital temperature controller at the front
of the workcell. The fluid heating reservoir consists of a fluid passage
body and high-pressure housing (3). The heater cartridge and heat
limiter are located within the fluid passage body.
1211001A
5
4
3
1
2
Fig. 1 SCH-1 Heater
1. Fluid outlet port
2. Fluid inlet port
3. High pressure housing
4. Fluid passage body
5. Electrical enclosure
2. Description
