manualshive.com logo in svg

Nordson 107 041A, Руководство пользователя

Поделиться
Скачать
Nordson 107 041A Скачать руководство пользователя страница 12

Safety

1-2

E

1995 Nordson Corporation

All rights reserved

Issued 11/95

12–28s1

WARNING:  Risk of electrical shock.  Failure to observe this
warning may result in personal injury, death, or equipment
damage.

WARNING:  Disconnect equipment from line voltage.  Failure to
observe this warning may result in personal injury, death, or
equipment damage.

WARNING:  Risk of explosion or fire.  Fire, open flames, and
smoking prohibited.

WARNING:  Wear protective clothing, safety goggles, and
approved respiratory protection.  Failure to observe may result
in serious injury.

WARNING:  Hot! Risk of burns.  Wear heat-protective clothing,
safety goggles with side shields and/or heat-protective gloves
depending on the symbol shown.

WARNING:  System or material pressurized.  Relieve pressure.
Failure to observe this warning may result in serious injury or
death.

WARNING:  Injection hazard.  Do not point film coaters at
yourself or other personnel.  Failure to observe this warning
may result in serious injury or death.

2. Safety Symbols 

 (contd.)

Содержание 107 041A







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды