NORDAC SK 700E Operating Manual
24
Subject to technical alterations
BU 0700 EN
Functions of the ParameterBox
LCD display
Graphic-capable, backlit LCD display for displaying operating values and parameters for the connected
inverter and ParameterBox parameters.
Using the
SELECTION keys
to toggle between the menu levels and menu items.
Press the
and
keys together to go back one level.
The contents of individual parameters can be altered with the
VALUES keys.
Press the
and
keys together to load the default values of the parameter selected.
When controlling the inverter using the keyboard, the frequency setpoint is set using the VALUE keys.
Press the
ENTER key
to select a menu group or accept the changed menu item or parameter value.
Note
: If a parameter is to remain, without a new value being stored, then one of the SELECTION keys
can be used for the purpose.
If the inverter is to be controlled directly from the keyboard (not control terminals), then the actual setpoint
frequency can be stored under the Jog Frequency parameter (P113).
START key
for switching on the frequency inverter.
Note
:
Can only be used if this function
has not been blocked in parameter
P509 or P540.
STOP key
for switching off the frequency inverter.
The direction of rotation of the motor changes when the
DIRECTION key
is operated. Rotation direction left is
indicated by a minus sign.
Attention!
Take care when operating pumps, screw
conveyors, ventilators, etc.
ON
ERROR
The LED's indicate the actual status of the ParameterBox.
ON
The ParameterBox is connected to the power supply and is operational.
ERROR
An error has occurred while processing data or in the connected frequency inverter.
