Nivus OCM PRO CF, Инструкция по эксплуатации

Страница: 68 / 194

Instruction manual
OCM Pro CF
page 68 OCM Pro CF - Rev. 09 as of 07.06.2016
®
Five basic menus can be selected, visible in the headline of the display. They
can be selected individually. The menus are:
RUN Standard operation mode. Apart from indicating the names of
measurement places, time, flow rate, level and average flow velocity
optionally allows to indicate the flow velocity distribution. Additionally
it is possible to show day totals and error messages including time
stamps or to graphically indicate the history of flow volumes, filling
level and average flow velocity.
PAR This menu is the most extensive of the OCM Pro CF. It is for the
complete parameter setting of dimensions of the measurement
place, sensor selection, analog and digital inputs and outputs,
storage, data transmission and regulator function.
I/O This menu includes information about internal operation of the
OCM Pro CF. All current values can be displayed, as well as the
values of analog and digital outputs and relays. Additionally, echoes
of the sensors and single velocities are displayed. It further allows to
determine the remaining capacity as well as the remaining memory
time on an optionally plugged memory card resulting from the cycle
time
CAL Here it is possible to adjust height (depth) and flow velocity of analog
outputs and to simulate analog as well as digital outputs. To detect
very low volumes occurring at minimum levels which do not allow to
reliably detecting the flow velocity, it is possible to set up an
automatic flow calculation based on the manning formula here.
EXTRA This sub-menu includes basic display settings: contrast, background
lighting, language, units, system times and totalizer presets.