Nivus OCM PRO CF, Инструкция по эксплуатации

Страница: 126 / 194

Instruction manual
OCM Pro CF
page 126 OCM Pro CF - Rev. 09 as of 07.06.2016
®
Periodic interval This parameter is to set the memory cycle. Select from settings between 1
minute and 1 hour.
It is possible to set values between 1 minute and 1 hour. There are only exact
fractional amounts of 1 hour allowed to be set (1 min.; 2 min.; 3 min.; 4 min.; 5
min.; 6 min.; 10 min.; 15 min.; 20 min.; 30 min. or 60 min.).
Entering other values is going to cause the OCM Pro to set the next lower
interval value.
Fig. 9-104 Entering the storage cycle
Select data This parameter point is to define which data sets are to be stored in addition to
the automatic storage of filling level, average flow velocity, volume and medium
temperature.
Choose from analog input 1-4 and system condition here.
Fig. 9-105 Selectable data