Nivus OCM PRO CF, Инструкция по эксплуатации

Страница: 57 / 194

Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016 page 57
1. Select your unit on >www.nivus.com< using the access portal.
2. The portal will “wake up” the unit sending a direct call.
3. The OCM Pro CF is setting up Internet access logging in to the portal
subsequently.
4. The portal is going to establish a connection between unit and user using
the internal OCM Pro CF web server
Fig. 7-42 Communication via Internet
7.6.3 Communication Setup via Access Portal
Important Note
Setting up an Internet communication for one or several NIVUS flow mea-
surement units requires an initial setup by NIVUS or a company authorised by
NIVUS.
Important Note
Setting up a modem connection (analog, ISDN, GPRS or similar) will cause
communication expenses depending on the connection chosen. Please ob-
serve while transmitting data.
After the initial setup has been finished successfully following units, which are
equipped with the same transmission system, can be set up by the customer or
the customer’s system administrator.
A "Start portal" is required to start Internet connection.
This start portal is available under
http://www.domoport.de/ .
To start communication, enter the address mentioned before into your browser’s
address line.
This will take you to the homepage of the provider (Domoport).
Enter your "Username" and "Password".
You are going to receive both codes after the initial setup has been carried out
by NIVUS. You can modify the names and passwords yourself.