Nivus OCM PRO CF, Инструкция по эксплуатации

Страница: 78 / 194

Instruction manual
OCM Pro CF
page 78 OCM Pro CF - Rev. 09 as of 07.06.2016
®
System Time In order to perform various control and memory functions, the unit includes an
internal system clock saving dates of year, weekdays and week numbers. The
clock settings can be modified if required (different time zones, summer time /
winter time etc.).
First select the menu point >Info<:
Fig. 9-16 System time submenu
The current system time is indicated after the settings have been confirmed:
1 Date
2 Week no.
3 Time
Fig. 9-17 System time screen
This menu point is for indicating purposes only. Hence the system time cannot
be adjusted here. Modifications can be carried out in the individual menus “Date”
and "Time“.
The according week number will bet set automatically as soon as the date has
been set.
Set Total-Counter This menu allows to newly set the totalizer indicated on the main screen. This
feature is normally going to performed in case of replacing a transmitter which
has to indicate the same value as before replacement.
After the new value has been set confirm twice using the "Enter“ key and type in
the PIN “2718“ (up to 2 faulty entries possible). Otherwise the new value will not
be accepted.
Fig. 9-18 Totalizer modification