Nivus NFP, Инструкция по эксплуатации

Страница: 47 / 87

Parameter Setting
NFP - rev. 04 / 23.05.2018 page 47
29.1 Parameter Menu “Measurement Place”
This menu is one of the most important basic menus for parameter setting as the measure-
ment place is going to be defined here.
Fig. 29-2 Submenu measurement place
>Name<
NIVUS recommends to coordinate and to define names according to
names stated in the respective documents. Names may contain up
to 20 letters. The display, however, does not necessarily indicate the
complete name; what is decisive is the available space on each in-
dividual page.
After the submenu >Name< has been selected the basic setting
“NIVUS” will come up. There is a cursor blinking below the first digit
which can be modified.
Underneath the measurement place name you can find a table with
20 lines containing all uppercase and lowercase letters as well as a
large number of special characters (see Fig. 29-3). Use the keys
>up< and >down< to jump across two lines up or down at each key
action.
To complete the name of the measurement place use the four arrow
keys and confirm your selection with >ENTER<. The cursor subse-
quently will jump one digit to the right enabling you to choose the
next character.
Surplus or incorrect characters can be overwritten by entering a
blank which can be found top left in the table.
In order to modify an existing name move the input cursor right by
simultaneously pressing the >right< + >down< or >up< arrow keys.
Press >left< + >down< or >up< to move to the left.
1
Current name of the measurement place
2
Selected character
3
Selection list
Fig. 29-3 Setting the name of the measurement place