Nivus NFP, Инструкция по эксплуатации

Страница: 38 / 87

Instruction Manual
NIVUS Full Pipe
page 38 NFP - rev. 04 / 23.05.2018
Parameter Setting
26 Basics of Parameter Setting
The transmitter in the background operates with the settings which have been entered at the
beginning of the parameter setting. The system will not ask to accept the modifications before
the settings or modifications have been finished.
Choosing >Save values< will prompt you to enter the system PIN (may be abbreviated as
“PIN” within the display context).
Default setting:
2718
Type in if prompted
Share password / system PIN only with authorised persons
Never share the system PIN with unauthorised persons. Do not even leave the code next to
the equipment nor write it down on it.
The system PIN protects from unauthorised access.
Single input of system PIN within 24 hours
The system PIN must be entered only once within 24 hours. The transmitter will save more
password-protected settings within this period without the need to re-enter the PIN.
Options at the end of setting parameters:
•
Save modified parameters by pressing >save new values< and inserting the System-
PIN
•
Jumping back to the previous level using the >back< function to modify settings which
might have been forgotten (without the need to buffer previously modified settings)
•
Quit setting parameters and reject any modification by pressing >cancel<
Fig. 26-1 Screen on end of parameter setting
The transmitter will indicate if the system PIN should have been entered incorrectly and
then waits for correct entry.
If you should have forgotten to enter the system PIN use the >ESC< key to go back within the
menu.