Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
36
5.4.2.1 SAVING OF DATA
Measurement data is automatically saved in the micro SD card built in the instrument.
When a measurement is started for the first time after the power is turned on, a folder is
created. The file name is the measurement start date and time (yyyymmdd_hhmmss).
Processing from “START” to “STOP” is defined as one measurement, and sequential
measurement numbers starting from one are given to data items to be saved. The
measurement numbers are the same as those displayed on the measurement screen.
Data items are saved in the same folder until the instrument is turned off.
(Refer to “5.5 MEASUREMENT DATA”.)
5.4.2.2 CHECK DATA
It is possible to check the maximum mercury concentration and average mercury
concentration of each measurement.
It is also possible to display a time series graph.
(1)
Press “Check Data” on the menu screen.
(2)
Press the name of a folder in which data to be checked has been saved.
(3)
The maximum mercury concentration and average mercury concentration of each
measurement are displayed.
When the number of data items is large, slide the bar on the right.
