![Nippon EMP-3 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/nippon/emp-3/emp-3_instruction-manual_1695691016.webp)
Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
12
PREPARATION FOR MEASUREMENT
Observe the following conditions. Otherwise, the battery may
ignite or explode.
●
Do not use a battery other than the dedicated one.
●
Charge the battery using the supplied battery charger.
When charging, do not apply a voltage out of the power
supply range to the battery charger.
●
Charge and keep the battery indoors and at the normal
temperature (0
C to 45
C).
●
Do not wet the battery with water or expose it to a humid
environment.
●
Do not give a shock to the battery by dropping, throwing or
the like.
●
Connect the battery to the analyzer or battery charger in the
right direction.
●
If an abnormality of the battery such as a deformation,
heating or liquid leakage is found, stop using it
immediately.
●
Do not charge forcibly or use the battery when its lifetime
has expired.
Wipe off dust attached around the power plug and terminals.
Otherwise, a fire may result.
The battery life decreases because of the self-discharge even
when the battery is not used. Check the remaining of battery
life before a measurement. When the battery has been left
unused, charge it before the use.
The battery is a consumable. The maximum capacity
deteriorates as charging is repeated. Replace it with a new one
early.
(After 300 times, the capacity deteriorates to
approximately 60%.)
When charging is not completed even after 5 hours or more,
stop it promptly.
The lifetime of the battery has possibly expired, or the battery
charger may be faulty.
When the battery has been damaged or liquid leakage has
occurred, do not charge it.
It is unnecessary to charge the battery each time it is used. However, when it has been left
unused for some period of time or the remaining battery life is insufficient at a startup, use
a spare battery or detach the battery and charge it using the dedicated battery charger.
* The continuous operation of the EMP-3 is possible for five hours and a half using a
new, fully charged battery.
It takes approximately five hours to charge an empty battery fully.
Warning
Caution