Instruction Manual: EMP-3
NIC-TD-0000067-01
Nippon Instruments Corporation
31
MEASUREMENT SCREEN
5.3.1.1 DESCRIPTIONS OF ICONS
No.
Name
Description
1
Interfering
Component
Confirmation
Button
Used to check the presence/absence of interfering components.
(Refer to “4.5.3.4 CHECKING OF DRIFT AND
”.)
2
Measurement No.
Number of measurements after the turning on of the instrument
3
Maximum Mercury
Concentration
Maximum mercury concentration in a measurement period
4
Average Mercury
Concentration
Average mercury concentration in a measurement period
5
Level Meter
An instantaneous value is visually displayed using a bar. (It is possible to
change the display range using “Scale”.)
This is displayed in yellow when the value approaches the alarm value and
in red when the value exceeds the alarm value.
6
Status Display
This is displayed during the instrument adjustment or ZERO check. (It is
not displayed during a measurement.)
7
Instantaneous Value
Instantaneous mercury concentration at a measurement
This is displayed in gray when alarm setting is OFF and exceed
2000μg/Nm
3
.
8
Elapsed Time
The total time and elapsed time of each status are displayed.
9
Scale Button
The display range of the level meter is specified.
10
Graph Button
Switching to the “Graph” screen
11
STOP Button
A measurement is stopped.
1
9
2
3
8
6
5
4
7
10
11
