D-F10137 NP-2651/3651 Product Spec. Rev.0.01(Provisional)
28
4.1.2
Memory Switch Setting by Manual
In case of setting or change memory switch by manual, please conduct a following operation under
condition of enabling print.
1) Transition to setting mode.
(1)
Please power ON (Confirm startup of printer)
(2)
Please keep thermal head cover open , turn FEED switch on.
(3)
Please keep holding FEED switch for more than 3 seconds.
(4)
ALARM LED(RED) blinks, to transition mode for writing memory switch.
(5)
Please turn FEED switch OFF.(Release holding condition)
2) How to set each switch
(1)
Set desired memory switch by DIP switch.
(2)
Turn FEED switch on, duplicate setting of DIP switch into memory switch.
(3)
ALARM LED(RED) blinks, end of duplication.
(4)
Return setting of DIP switch to original position, close thermal head cover.
(Set paper at the same time.)
(5)
Memory switch content is printed and confirm it.
[Note]
・
Please make sure to return DIP switch.
・
In case of cancelling a mode of writing memory switch, please keep thermal head cover closed.
