Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 88 / 152

LLE14BRDA001A/E
7 - 24
7.3.5 Tracing unit (43401-4000)
7.3.5.1 Tilt of tracing unit stylus
Purpose: Adjusting the tilt of the tracing unit stylus (40340-M474)
Jig: Standard frame (40340-M391)
1.Set the standard frame (40340-M391) to the
tracing unit.
2. Press and hold (both-eye tracing) for
approx. 3 seconds.
3. Confirm that the stylus (40340-M474) moves
toward the frame and that the angle where
the stylus contacts the frame is 90º.
4. If the angle is not 90º, follow Steps 2 and 3 in
“6.12 Stylus” to adjust the angle (replacement
of stylus is not necessary).
7.3.5.2 Position of cable CA63
Purpose: Adjusting the position of cable CA63 (40340-CA63)
Jig: Pattern setting unit (40372-0010)
1.Set the pattern tracing unit (40372-0010).
2.Loosen CS3 × 6 (n = 2) to adjust the position
of the cable CA63 (40340-CA63) sensor so
that the shading plate (40340-M324) can be
set into the cable.
391
-0010
40372
2
CS3×6
CA63