Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 118 / 152

LLE14BRDA001A/E
7 - 54
<Flat edging/safety beveling wheel position adjustment>
1) Call up the φ 45 internal data.
2) Select MTL and GUI (5:5). Flat edge and
safety bevel a CR39, -3 to -5 D lens.
3) Press to move the arrow (
→
) to “SFB
Wheel Pos. (FLT, F)” and “SFB Wheel Pos.
(FLT, R)”. Press
or to change the
values so that each safety bevel width is
within 0.3 ±0.12 mm.
• To increase the safety bevel widths on
both front and rear surfaces, increase the
values.
• To decrease the safety bevel widths on
both front and rear surfaces, decrease
the values.
7.6.8 Bevel/safety bevel axis
Purpose: Adjusting beveling/safety beveling axis for a lens processed with the 45 internal
data
Jig: A CR39, -3 to -5 D lens
1. Turn on the main body and press to
display the MENU screen.
2. Press to move the arrow (
→
) to “AXIS
adjustment” and press .
The AXIS adjustment screen appears.
3. Call up the 45 internal data.
4. Select GUI (5:5). Bevel and safety bevel a
CR39, -3 to -5 D lens.
5. Check the safety bevel axis on the front
surface.
Confirm that the safety bevel width remains
nearly the same along the top edge from left
to right as seen from the lens front. If it does
not, press
to move the arrow (
→
) to “SFB
AXS const. (BVL/F)”, then press or to
change the parameter value.
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
㧖ޓޓޓޓޓޓ㧳㨞㨛㨛㨢㨑ޓ㧒ޓ㧿㧲㧮ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓޓޓޓޓޓޓ㧖ޓ
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓ㧖㧱㨄㧵㨀ޓ㧦ޓ㧼㨞㨑㨟㨟ޓ㧱㧺㨀㧱㧾ޓ
ޓ
ޓޓޓ㧳㨞㨛㨛㨢㨑ޓ㧰㨑㨜㨠㨔 㧦ޓޓ㧜㧚㧟㨙㨙
ޓ
ޓޓޓޓޓ㧳㨞㨛㨛㨢㨑ޓ㨃㨕㨐㨠㨔 㧦ޓޓ㧜㧚㧢㨙㨙
ޓ
ޓޓޓޓ㧳㨞㨛㨛㨢㨑ޓ㧼㨛㨟㨕㨠㨕㨛㨚 㧦ψ㧜㧚㧞㧜㨙㨙
ޓ
ޓޓޓޓޓ㧿㨍㨒㨑㨠㨥ޓ㧮㨑㨢㨑㨘ޓ㧹㨛㨐㨑 㧦ޓޓ㧲ޓ㧒ޓ㧾
ޓ
ޓޓޓޓޓ㧿㧲㧮ޓ㨃㨕㨐㨠㨔 㧔㧮㨂㧸㧘 㧲㨞㨛㨚㨠 㧦㧗ޓ㧜㧚㧞㨙㨙
ޓ
ޓޓޓޓޓ㧿㧲㧮ޓ㨃㨕㨐㨠㨔 㧔㧮㨂㧸㧘 㧾㨑㨍㨞 㧦㧗ޓ㧜㧚㧟㨙㨙
ޓ
ޓޓޓޓޓ㧿㧲㧮ޓ㨃㨕㨐㨠㨔 㧔㧲㧸㨀㧘 㧲㨞㨛㨚㨠 㧦㧗ޓ㧜㧚㧞㨙㨙
ޓ
ޓޓޓޓޓ㧿㧲㧮ޓ㨃㨕㨐㨠㨔 㧔㧲㧸㨀㧘 㧾㨑㨍㨞 㧦㧗ޓ㧜㧚㧟㨙㨙
ޓ
ޓޓޓޓ㧿㧲㧮ޓ㨃㨔㨑㨑㨘ޓ㧴㨑㨕㨓㨔㨠 㧦㧙㧜㧚㧟㧜㨙㨙
ޓ
ޓޓޓ㧿㧲㧮ޓ㨃㨔㨑㨑㨘ޓ㧼㨛㨟㧚 㧔㧮㨂㧸㧘 㧲 㧦㧙㧜㧚㧞㧜㨙㨙
ޓ
ޓޓޓޓޓ㧿㧲㧮ޓ㨃㨔㨑㨑㨘ޓ㧼㨛㨟㧚 㧔㧮㨂㧸㧘 㧾 㧦ޓ㧜㧚㧜㧜㨙㨙
ޓ
ޓޓޓψޓ㧿㧲㧮ޓ㨃㨔㨑㨑㨘ޓ㧼㨛㨟㧚 㧔㧲㧸㨀㧘 㧲 㧦㧙㧜㧚㧞㧡㨙㨙
㧿㧲㧮ޓ㨃㨔㨑㨑㨘ޓ㧼㨛㨟㧚 㧔㧲㧸㨀㧘 㧾 㧦㧙㧜㧚㧞㧡㨙㨙
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
㧖ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ㧖
㧖ޓޓޓޓޓޓޓޓޓޓޓޓޓ㧹ޓޓ㧱ޓޓ㧺ޓޓ㨁ޓޓޓޓޓޓޓޓޓޓޓޓޓ㧖
㧖ޓޓޓޓޓޓޓޓ㧸㨑㨚㨓㨠㨔ޓ㧾㧦㧝㧣㧣㧚㧥㧤ޓ㧸㧦㧝㧣㧤㧚㧜㧞ޓޓޓޓ㧖
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
ޓޓޓޓޓޓޓޓޓޓޓ㧖㧱㨤㨑㨏㨡㨠㨑ޓ㧦ޓ㧼㨞㨑㨟㨟ޓ㧱㧺㨀㧱㧾ޓޓޓޓޓޓ
ޓ
ޓޓޓޓޓ㧼㨞㨛㨏㨑㨟㨟ޓ㨏㨛㨡㨚㨠㨑㨞ޓ
ޓ
ޓޓޓޓޓޓ㨃㨔㨑㨑㨘ޓ㨐㨞㨑㨟㨟㨕㨚㨓ޓ
ޓ
ޓޓޓޓޓ㧿㨕㨦㨑ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓ
ޓ
ޓޓޓޓޓޓ㧮㨑㨢㨑㨘ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓ
ޓ
ޓޓޓޓψޓ㧭㨄㧵㧿ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓ
ޓ
ޓޓޓޓޓޓ㧼㧰ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓ
ޓ
ޓޓޓޓ㧳㨞㨛㨛㨢㨑ޓ㧒ޓ㧿㧲㧮ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓ
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
㧖ޓޓޓޓޓޓޓޓޓޓ㧭㨄㧵㧿ޓ㨍㨐㨖㨡㨟㨠㨙㨑㨚㨠ޓޓޓޓޓޓޓޓޓޓޓ㧖
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓ㧖㧱㨄㧵㨀ޓ㧦ޓ㧼㨞㨑㨟㨟ޓ㧱㧺㨀㧱㧾
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓ㧼㧸㧭ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㨎㨑㨢㨑㨘㧕 㧦㧙㧝㧚㧞㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧼㧸㧭ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㨒㨘㨍㨠㧕 㧦㧙㧝㧚㧞㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧼㧯ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㨎㨑㨢㨑㨘㧕 㧦㧙㧝㧚㧞㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧼㧯ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㨒㨘㨍㨠㧕 㧦㧙㧝㧚㧞㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧳㧸㧿ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㨎㨑㨢㨑㨘㧕 㧦㧙㧡㧚㧜㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧳㧸㧿ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㨒㨘㨍㨠㧕 㧦㧙㧡㧚㧜㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧳㧾㧻㧻㨂㧱㧒㧿㧲㧮ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠 㧦㧗㧜㧚㧟㧟
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓψ㧿㧲㧮ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㧮㨂㧸㧲㧕 㧦ޓ㧜㧚㧜㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧿㧲㧮ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㧮㨂㧸㧾㧕 㧦ޓ㧜㧚㧜㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧿㧲㧮ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㧲㧸㨀㧲㧕 㧦ޓ㧜㧚㧜㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ
ޓޓޓޓޓޓ㧿㧲㧮ޓ㧭㨄㧿ޓ㨏㨛㨚㨟㨠㧚 㧔㧲㧸㨀㧾㧕 㧦ޓ㧜㧚㧜㧜
ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ