Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 101 / 152

LLE14BRDA001A/E
7 - 37
8. After measurement is completed, confirm that
the LED of
4
blinks. Then set the φ 60
standard frame jig (40390-3300) as shown to
the right.
* Set the jig in the maximum possible center
since the frame gain adjustment can be
affected.
9. Press
4
.
10. After measurement is completed, confirm that
the LED of blinks. Then set the 45
standard frame jig (40390-M301) in the center
of the sliders as shown to the right.
11. Press .
12. After measurement is completed, confirm that
the LEDs of
4
, , and alternately
blink. Then set the 45 standard pattern jig
(41476-M002) to the pattern setting unit
(40372-0010) as shown to the right.
13. Press .
14. After calibration is completed properly, a short
beep sounds.
* If continuing beeps sound, calibration is not
completed properly. The measurement data
or operation may have failure.
It is necessary to inspect the inside of the
tracing unit.
(40390-3300)
(40390-M301)
-0010
40372
(41476-M002)