Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 122 / 152

LLE14BRDA001A/E
7 - 58
4. Open the processing chamber door.
5. Dress the wheel.
<Roughing wheel for glass lenses and finishing wheel>
1) Press . The wheel rotates and cooling water runs.
2) Wet the dressing stick well with running water.
Finishing wheel => Use the dressing stick for finishing wheel.
Roughing wheel for glass lenses => Use the dressing stick for roughing wheel.
3) Press to stop the cooling water.
4) Apply the dressing stick to the rotating wheel with slightly increased pressure. Continue
applying the stick to the wheel for approx. 5 seconds.
5) Release the dressing stick from the wheel.
6) Press
. Start the cooling water to wash the wheel surface away.
7) Repeat Steps 3 to 6 two or three times.
8) Press
. The wheel and water come to a stop.
<Polishing wheel and flat polishing wheel>
* Maintain the polishing wheel and flat polishing wheel with the compound kit.
1) Press . The wheel rotates and the
cooling water runs.
2) Press to stop the cooling water.
3) Press to stop the water of the water
curtain.
4) Attach a pad to the specified stick. Attach
the blue surface of the pad to the rough
surface of the stick.
5) Thoroughly apply the supplied compound
to only one side of the pad.
Pad Specified stick
Compound
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
㧖ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ㧖
㧖ޓޓޓޓޓޓޓޓޓޓޓޓ㨃㨔㨑㨑㨘ޓ㨐㨞㨑㨟㨟㨕㨚㨓ޓޓޓޓޓޓޓޓޓޓ㧖
㧖ޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓޓ㧖
㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖㧖
ޓޓޓޓޓޓޓ㧼㨞㨑㨟㨟ޓ㨍ޓ㨒㨛㨘㨘㨛㨣㨕㨚㨓ޓ㧿㨃ޓޓޓޓޓޓ
ޓ
ޓޓޓޓޓޓޓޓޓޓޓ㨣㨔㨑㨚ޓ㨚㨛㨠ޓ㨏㨔㨡㨏㨗㨕㨚㨓㧚ޓ
ޓ
ޓޓޓޓ㧿㨀㧭㧾㨀 㧦ޓ㧰㨞㨑㨟㨟㨣㨍㨠㨑㨞ޓ㨛㨚㧘 ޓ㨛㨒㨒ޓ
ޓ
ޓޓޓޓ㧿 㧦ޓ㧿㨍㨒㨑㨠㨥ޓ㧮㨑㨢㨑㨘ޓ㨃㨔㨑㨑㨘ޓ
ޓ
ޓޓޓޓ㧿㨀㧻㧼 㧦ޓ㧼㧭㨁㧿㧱ޓ
ޓ
ޓޓޓޓ㧱㧺㨀㧱㧾 㧦ޓ㧱㨄㧵㨀ޓ
ޓ
ޓ