Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 104 / 152

LLE14BRDA001A/E
7 - 40
<When using the 45 internal data>
1) Call up the 45 internal data.
2) Set the size to +3.00 and flat edge a lens.
3) Apply powder or grease to the rear surface of the processed lens. Set the size to 0.00
and press .
4) After the rear surface measurement is completed, press .
5) Confirm that the measurement trace on the rear surface is parallel to the lens edges. If it
is not, change the parameter setting to perform adjustment.
6) When the measurement trace is diagonally right up, increase the value; when the trace
is diagonally right down, decrease the value to perform axis adjustment.
7) Apply powder or grease to the front surface of the same lens.
8) Set the lens and press
.
9) After the front surface measurement is completed, press .
10) Confirm that the measurement trace on the front surface is parallel to the lens edges. If
it is not, change the parameter setting to perform adjustment.
11) When the measurement trace is diagonally right up, decrease the value; when the trace
is diagonally right down, increase the value to perform axis adjustment.
Rear surface
Measurement trace
Front surface
Measurement trace