Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 48 / 152

LLE14BRDA001A/E
6 - 14
4. Replace the cable (40340-CA33) as follows:
1) Disconnect connector J5 (P605) from the board (40340-BA06).
2) Unscrew CK2 × 5 (n = 2) to replace the cable (40340-CA33).
5. Reassemble the parts in the reverse order.
* Readjustment is necessary (see 6.16).
6.21 Safety Beveling/Grooving ASSY. (44001-6000)
Replacement part: Safety beveling/grooving ASSY. (44001-6000)
1. Remove the top cover ASSY. (44402-2100)
and left side cover (44401-M208) (see 5.4).
2. Remove the hose clip (44001-M070) and duct
(40350-M084) (see 5.4).
3. Disconnect connector J1 (P601) from the
board (40340-BA06).
4. Peel off the protective sheet (44001-M905).
5. Disconnect connector CN03 of the motor cable
(40340-CA34), connector CN04 of the pulse
motor (40340-E035), and connector CN05 of
the sensor cable (44001-CA42).
6. Unscrew SB6 × 20 (n = 2) to replace the safety
beveling/grooving ASSY. (44001-6000).
7. Reassemble the parts in the reverse order.
1) Adjust the arm position of the safety
beveling/grooving ASSY. (see 7.3.3.1).
2) Perform calibration of the safety
beveling/grooving ASSY. (see 7.5.3).
2
SB6×20
931
-6000
44001
CA42
905