Nidek Medical Le 1000, Руководство по обслуживанию

Страница: 107 / 152

LLE14BRDA001A/E
7 - 43
<When using the axis alignment jig>
1) Call up the 45 internal data.
2) Set the processed lens to the axis alignment jig and measure the axis angle based on
the lens top edge and jig horizontal lines.
3) If the axis is misaligned, adjust it by changing the parameter value.
4) Check the axis with the lens set to the axis alignment jig.
• If the lens top edge is diagonally right up, increase the value.
• If the lens top edge is diagonally right down, decrease the value .
<When drawing a horizontal line on a lens>
1) Call up the 45 internal data.
2) Process a lens blocked while aligned with the horizontal line.
3) Measure the axis angle of the processed lens using graph paper.
4) If the axis is misaligned, adjust it by changing the parameter value.
• If the horizontal line is diagonally right up when viewed from the lens front, increase the
value.
• If the horizontal line is diagonally right down when viewed from the lens front, decrease
the value.
᳓ᐔ✢
Horizontal line