28
Installation and quick start commissioning guide - Commander ID300/302
5511 en - 2017.06 / a
QUICK START COMMISSIONING
4.2 - Standard configuration with Field Keypad RTC or ID-SIZEx-Keypad
In the case the default settings of the Commander ID300/302 standard configuration (Pr
00.005
= STANDARD AV/
AI) do not suit the application, the user can modify parameters by using a keypad option.
To connect the Keypad, use the RJ45 connector located either on ID-3 CABLE-RJ45-FLANGE option or near to the
terminal blocks of the drive. See the relevant installation sheet of the keypad for more details.
4.2.1 - Understanding the display
5
3
4
1
6
7
Field Keypad RTC
ID-SIZEx-Keypad
(1)
2. Start reverse (Auxiliary button),
Field Keypad RTC only
4. Navigation buttons (x4)
5. Stop / Reset (red) button
6. Enter button
1. Escape button
3. Start forward button (Green)
7. Status LED, ID-SIZEx-Keypad
(1)
only
(1)
ID-SIZEx-Keypad can be either
ID-SIZE1-Keypad or ID-SIZE3-Keypad
4.2.2 - How to read or edit parameters
By default, only the first 10 parameters of Menu 0 are available. For all Menu 0 parameter access, set Pr
00.010
to
Level 2 and for advanced parameter access set Pr
00.010
to All Menus.
To enter Edit Mode,
press key
Status
Mode
(Display
not
flashing)
Parameter
Mode
(Upper row
display flashing)
Edit Mode
(Character to be edited in lower line of display flashing)
Change parameter values using keys.
When returning
to Parameter
Mode use the
keys to select
another parameter
to change, if
required
To enter Parameter
Mode, press key or
Temporary
Parameter
Mode
(Upper display
flashing)
To return to Status Mode,
RO
parameter
R/W
parameter
9
To select parameter
Press
To return to Parameter Mode,
Press key to keep the new parameter value
Press key to ignore the new parameter value and return
the parameter to the pre-edited value
Press key
Timeout
or
Press key
Timeout
Timeout
