3
– English
EN
BUTTON FUNCTION
DESCRIPTION
+
Increase by a single level (bound by the function
and displayed by the LEDs).
–
Decrease by a single level (bound by the function
and displayed by the LEDs).
DRY
CONT.
TRANSMITTER
INSERTION
Enables the functions related to the storage of the
transmitters.
DRY
CONT.
COUNTER-
CLOCKWISE
DIRECTION
Programmes the counter-clockwise rotation of the
motor.
DRY
CONT.
CLOCKWISE
DIRECTION
Programmes the clockwise rotation of the motor.
DRY
CONT.
DRY CONTACT
Programmes the behavior of the “dry-contact” in
the motor.
AUTO
POSITION “0”
Enables the functions related to the storage of limit
switch “0”.
AUTO
POSITION “1”
Enables the functions related to the storage of limit
switch “1”.
AUTO
POSITION “I”
Enables the functions related to the storage of
intermediate position “I”.
AUTO
AUTOMATIC
SEARCH POSI-
TIONS “0” - “1”
Starts the automatic search procedure of the limit
switches “0” and “1”.
RDC
SPEED
Displays and sets the motor speed.
RDC
TIME OF
MANEUVER
Displays and sets the duration of the motor’s
maneuver.
RDC
SOFT- START /
SOFT-STOP
Displays and sets the level of “soft start” and “soft
stop”.
RDC
TORQUE
REDUCTION
Displays and sets the level of the obstacle sensitiv-
ity (or the torque reduction).
ON
WIND LEVEL
Displays and sets the level of intervention of the
“wind protection” function.
ON
SWITCHING ON /
SWITCHING OFF
SENSORS
Enables and/or disables the automatic movement
caused by the SUN and RAIN sensors.
RAIN
DIRECTION
Displays and sets the direction of movement in
case of intervention of the RAIN sensor.
ON
SUN LEVEL
Displays and sets the level of intervention of the
“sun protection” function.
BUTTON FUNCTION
DESCRIPTION
RADIO
TEST
READ
PARAMETERS
Reads the parameters and/or transmitters of the
connected motor and saves them on the internal
memory of TTPRO BD.
RADIO
TEST
WRITE
PARAMETERS
Writes the parameters and/or the transmitters of the
connected motor, reading them from the TTPRO BD
internal memory.
RADIO
TEST
ERASE
PARAMETERS
Deletes the selected parameters; if pressed for 3
seconds, restores the factory parameters.
F1
F2
F3
F1
Auxiliary functions 1 button.
F1
F2
F3
F2
Auxiliary functions 2 button.
F1
F2
F3
F3
Auxiliary functions 3 button.
RADIO
TEST
RADIO TEST
Displays the RF signal/noise level at 433.92 MHz
•
Usb
Displays the link status.
•
Chrg
Displays the battery charge status.
3.1.1 - BUTTONS FOR MOVEMENTS
A
ASCENT:
press and release the button
B
MANEUVER STOP:
press and release the button
C
DESCENT:
press and release the button
D
INTERMEDIATE POSITION
(if programmed):
press and release the keys
+
simultaneously
