English –
19
5.7 - External radio receiver (SPYBOX B/V1 only)
The control unit has a slot for mounting radio receivers with SM connector (optional accessories) belonging to the SMXI, OXI, etc. families, which
can be used to remotely control the control unit through transmitters that intervene on the unit’s inputs.
WARNING! – Before installing a receiver, disconnect the power supply to the control unit.
To install a receiver (“Figure 6”), loosen the screw (1), remove the lid (2) and insert the receiver (3) into the appropriate slot on the control unit’s
electronic board.
1
2
3
6
5.7.1 - Memorisation of radio transmitters
• Using a receiver in Mode 2:
with the memorisation of the transmitter in Mode 2 (see receiver man-
ual), each button on the transmitter can be associated with one of the
following commands on the control unit:
Key
Command
N° 1
Step-by-step
N° 2
Partial open 1
N° 3
Open
N° 4
Close
N° 5
Stop
N° 6
Step-by-Step Condominium
N° 7
Step-by-Step High priority
N° 8
Release and Open
N° 9
Release and Close
N° 10
Open and Lock automation
N° 11
Close and Lock automation
N° 12
Lock automation
N° 13
Release automation
N° 14
Timer On Courtesy light (SPYLIGHT)
N° 15
On-Off Courtesy Light (SPYLIGHT)
• Using a receiver in Mode 1:
with the memorisation of the transmitter in Mode 1 (see receiver manual)
the transmitter buttons are associated with the commands on the con-
trol unit as follows:
Key
Command
N° 1
Step-by-step
N° 2
Partial open
N° 3
Open
N° 4
Close
