28
– English
8
8 -
DISPOSAL OF THE PRODUCT
This product constitutes an integral part of the automation system, therefore it must be disposed of together with the former.
As in installation, also at the end of product lifetime, the disassembly and scrapping operations must be performed by qualified personnel.
This product is made up of different types of material, some of which can be recycled while others must be disposed of. Seek information on the
recycling and disposal systems envisaged by the local regulations in your area for this product category.
CAUTION! - Some parts of the product may contain polluting or hazardous substances which, if disposed of into the environment,
constitute serious environmental and health risks.
As indicated by the symbol, the product may not be disposed of as domestic waste. Sort the materials for disposal, according
to the methods envisaged by current legislation in your area, or return the product to the retailer when purchasing an equivalent
product.
CAUTION! - Local legislation may include the application of serious fines in the event of improper disposal of this
product.
9
9 -
MAINTENANCE
CAUTION! – disconnect the power supply to the control unit and any backup battery before performing any task on the product.
All maintenance operations that require the power supply to the control unit must be performed by a qualified technician.
CAUTION! – the motor carriage is powered by low voltage through the guide and the insulated metal profile inside it. The use of
lubricants such as oil or grease on these two components may degrade the electrical contact and lead to malfunctions. The guide
and the profile must not be lubricated around the areas of the sliding contacts.
Clean the guide and the control unit at least once a year
01.
Disconnect the mains power supply and any backup batteries
02.
Clean the guide with a damp cloth
03.
Release the motor carriage and move the door by hand, checking that the motor carriage slides freely in the guide
04.
Check that all the fixing screws are tight
05.
Re-lock the motor carriage to its initial position
06.
Clean the external box of the control unit and the photocell glass lenses (if present) with a damp cloth
07.
After completing the cleaning, connect any backup batteries and provide power
