8
– English
3
4
click
x2
click
x2
1
Clik
2
5
05.
insert the left limit switch (closing)
and right limit switch (opening)
06.
insert the power supply unit, while making sure that the side tabs slot correctly into their respective housings
CAUTION! – Depending on the chosen type of installation (06.a or 06.b), check the electrical connections of the motor
on the control unit (refer to Chapter 3.2, point 04).
06.a
unit positioned on the zone towards
the door
1 - press the side tabs
2 - insert the terminal element into
the guide
3 - secure the terminal element with
the relevant screw
1
1
2
3
06.b
unit positioned on the zone towards
the centre of the room
1 - press the side tabs
2 - insert the terminal element
3 - secure the terminal element with
the relevant screw
1
1
2
3
CAUTION! – If necessary, re-insert the carriage motor, see Chapter 7 - Table 12 - “Problem Inserting motor carriage
after performing maintenance”.
