22
– English
6.6 - Spylight
The Spylight module is the new light model that can be used as a courtesy light by installing it directly in the SPYRAIL rails. A maximum of 2 Spy-
lights can be installed on the same rail, while being very careful when positioning the modules:
each individual Spylight MUST be positioned
outside of the carriage’s useful stroke, in other words, beyond the stop limit switch.
The SPYLIGHT is designed to remain lit during the entire duration of the manoeuvre: when this terminates, the light will remain lit for a time equal
to the value set in the ‘Courtesy Light Time’ parameter (default value: 60 seconds).
With the motor stationary, the Courtesy Light can be switched on or off by pressing the STOP button, from the dedicated Light input, or through
the Oview programmer: for each command received, the status of the light will be inverted.
The maximum time available for the illumination of the Courtesy Light is 4 minutes, after which the light will switch off automatically.
IMPORTANT! - Whenever a SPYLIGHT is added or removed, it is compulsory to run the device acquisition procedure (Paragraph
5.3):
- It is highly inadvisable to impart movement commands without first having run this procedure.
- The SPYLIGHT re-proposes all the anomaly signals represented in the control unit through the internal courtesy light and the
BlueBus LED. At the end of the representation, the SPYLIGHT lights will switch off automatically.
01.
02.
03.
