Eng li sh
1 7
This manual is for use only by technical personnel qualified to carry out the installation.
No information given in this manual can be considered of any interest to the end user!
INDEX:
Quick guide
: 18
Introduction
: 19
Description of the product
: 19
Installation instructions
: 20
Wiring diagram
: 21
Description of connections
: 21
Connection instructions
: 22
Travel limits
: 23
Automatic limit search
: 23
Programming
: 24
Storing parameters
: 24
Manual programming of limits : 25
Programming pause time
: 27
Cancelling the memory
: 27
Setting mode function switches
: 28
Testing the unit
: 29
Description of functioning modes
: 29
“CHARGE” card for battery powering : 30
Maintenance
: 30
Technical data
: 30
IMPORTANT NOTICE:
It is our duty to remind you that you are carrying out operations on machine systems classified in the “Automatic gates and doors”
category and as such are considered particularly “hazardous”. It is your job to make them as “Safe” as is
reasonably possible!
Only qualified personnel should install and service the equipment. It is the responsibility of the installer to ensure that the
equipment is correctly and professionally installed in compliance with all relevant regulations and standards applicable in the
country of installation.
We draw your attention to the following most important European directives - it is the installers responsibility to check what other
regulations apply in the country of installation.
EEC 89/392 (Machine Directive)
EEC 89/336 (EMC Directive)
EEC 73/23 (Low Voltage Directive)
PrEN 12453 (Safety in using motorised doors - requirements and classifications)
PrEN 12445 (Safety in using motorised doors - testing methods)
Nice
products are designed and manufactured to meet all current European standards and it is essential that the installer also
installs the equipment in accordance with all local and European requirements.
Unqualified personnel or those who do not know the standards applicable to the “Automatic gates and doors” category:
Must under no circumstances attempt to install or service the equipment
Personnel who install or service the equipment without observing all the applicable standards:
Will be held responsible for any damage the system may cause!
