38
Basic opera ng
features
“PED” Pedestrian trigger.
(With no safety beams installed)
User manual reference -
Page 13
The PED trigger is a higher security op on and is used when access to or from the property is limited to exclude motor vehicles.
In the case of no safety beams being installed then the pedestrian auto-close func onality is disallowed for safety.
If the BT trigger is ac vated at any me during the pedestrian rou ne, the gate will open to the full open posi on and the pedestrian transac on
is cancelled. The system then reverts to the BT trigger mode confi gured.
There are two ways of ac va ng the “PED” func ons on this control card. Either via the hardwired PED input or the PED receiver channel.
Ac on
Response
Momentary PED trigger.
Buzzer beeps
pre-run
warning.
A er buzzer silences.
Gate begins
opening.
No buzzer tones.
At previously
programmed
pedestrian opening
distance.
Gate stops
and waits for
a pedestrian
trigger to close.
No buzzer tones.
Momentary PED trigger.
Buzzer beeps
pre-run
warning.
A er buzzer silences.
Gate begins
closing.
No buzzer tones.
At full closed posi on.
Gate stops.
No buzzer tones.
