Nice E.T. Systems Drive 300 Скачать руководство пользователя страница 30

Страница: 30 / 50

5lo

Adjus ng the length of the slow speed at the ends of travel.

From Ready status

rdy

The gate can be in any posi on when performing this
rou ne.

The factory default is: 200mm

Ac on

Response

Descrip on

Display

Buzzer

Gate

To enter the program
menu. Press and hold the



bu on un l buzzer

beeps.

Display changes to “Prg” and
buzzer beeps.

pr9

Not appicable.

Scroll < or > to select “Slo”

setup op on.

Display changes with each bu on

press.

5lo

Not appicable.

With “Slo” on the display,
press and release



Display changes to current se ng

in mm and buzzer beeps.

200

Not appicable.

Scroll < or > to the

required se ng.

Display changes with each bu on

press.

100

Not appicable.

With required selec on

displayed, press and
release



Display reverts to “Slo” and buzzer
beeps.

5lo

Not appicable.

Scroll le or right to next
program op on.

rdy

EXIT back to standby
status

pcl

Switching posi ve close mode on or oﬀ .

From Ready status

rdy

The gate can be in any posi on when performing this
rou ne.
The factory default is: Oﬀ

Ac on

Response

Descrip on

Display

Buzzer

Gate

To enter the program
menu. Press and hold the



bu on un l buzzer

beeps.

Display changes to “Prg” and
buzzer beeps.

pr9

Not appicable.

Scroll < or > to select “PcL”

setup op on.

Display changes with each bu on

press.

Pcl

Not appicable.

With “PcL” on the display,
press and release



Display changes to current se ng

in mm and buzzer beeps.

off

Not appicable.

Scroll < or > to the

required se ng.

Display changes with each bu on

press.

Not appicable.

With required selec on

displayed, press and
release



Display reverts to “PcL” and buzzer
beeps.

pcl

Not appicable.

Scroll le or right to next
program op on.

rdy

EXIT back to standby
status

Содержание E.T. Systems Drive 300



















































Результаты поиска

Содержание E.T. Systems Drive 300

Отзывы:

Похожие инструкции для E.T. Systems Drive 300

Бренды по названию

Популярные бренды

Nice E.T. Systems Drive 300, Инструкции по установке

Результаты поиска

Содержание E.T. Systems Drive 300

Отзывы:

Похожие инструкции для E.T. Systems Drive 300

Бренды по названию

Популярные бренды