19
Se ng up the gate run me. (Mandatory)
run
From Ready status
rdy
Before con nuing with the run me setup ensure the limit actuator has
been installed correctly as per page 16 in this manual. Begin with the
gate midway in its travel.
NB. To speed up the gate while running during this procedure, press and hold
either the < or > bu ons.
Ac on
Response
Descrip on
Display
Buzzer
Gate/s
To enter the program
menu. Press and hold the
bu on un l buzzer
beeps.
Display and buzzer
confi rms.
pr9
Scroll < or > to select the
run me setup op on.
Display scrolls
through op ons.
run
Ensure gate is engaged
midway and then press
bu on.
Display prompts
you to confi rm gate
closing direc on.
cl
dir
Confi rm gate closing
direc on by pressing and
releasing either the < or >
bu on.
Gate closes slowly.
Display confi rms.
Lft
r9t
When the closed posi on
is reached and the closed
limit is triggered. LED on.
Gate stops and starts
opening.
lrn
Press and release the
bu on to stop the gate
at the required open
posi on.
Gate stops opening.
Display asks you to
fi ne adjust the open
posi on if required.
adj
Fine adjust the open
posi on using the < or >
bu ons, if necessary.
Gate moves with
each bu on press in
either direc on.
adj
When sa sfi ed with the
open posi on, press and
release the
bu on to
save that posi on.
Gate closes slowly.
Display and buzzer
confi rms.
lrn
When the closed posi on
is reached and the closed
limit is triggered. LED on.
Gate stops. Display
and buzzer warn the
profi ling is about to
begin.
pro
Once warning tone has
stopped.
Gate begins running
open at full speed.
Display confi rms.
pro
When the previously
programmed open
posi on is reached.
Gate stops and
begins closing again
at full speed. Display
confi rms.
pro
When the closed posi on
is reached and the closed
limit is triggered. LED on.
Gate stops. Display
and buzzer confi rms.
dne
Scroll le or right to next
program op on.
OR
rdy
EXIT back to ready
status
