26
all
Receiver programming and setup.
Master erasing all users from the memory.
From Standby status
rdy
The gate can be in any posi on when performing this rou ne.
Ac on
Response
Descrip on
Display
Buzzer
Gate
To enter the program
menu. Press and hold the
bu on un l buzzer
beeps.
Display and buzzer
confi rms.
pr9
Scroll < or > to select the
receiver setup op on.
Display scrolls
through op ons.
rc
With “rc” on the display,
press and release
.
Display changes to
“Lrn” and buzzer
beeps once
lrn
Scroll < or > to select the
Erase remotes op on.
Display scrolls
through op ons.
era
With “ErA” on the display,
press and release
.
Display changes to
“Adr” and buzzer
beeps once.
adr
Scroll < or > to select the
Erase ALL memory op on.
Display scrolls
through op ons.
all
With “ALL” on the display,
press and hold
.
“ALL” remains
displayed
all
While s ll holding
press the > bu on.
Buzzer begins
beeping
intermi ently and
“ALL” begins fl ashing.
NB! Releasing either
bu on at this point
will “Can” cancel the
master erase.
all
Keep holding the bu ons.
Display changes
to “---” and buzzer
silences. The master
erase has begun.
---
Release the bu ons.
Buzzer beeps and
“dnE” displays to
indicate master erase
is done.
dne
Press and release X to
return to the main receiver
programming menu.
Display changes to
“ALL” and buzzer
beeps.
all
Scroll le or right to next
program op on.
OR
rdy
EXIT back to standby
status
