NF FRA5087 Скачать руководство пользователя страница 5

Страница: 5 / 194

FRA5087

Preface

Thank you for purchasing “FRA5087 Frequency Response Analyzer”.

Please read, first of all, “Safety Instructions: To safely use the frequency response

analyzer” on the next page, so that you can use the instrument in the correct and safe

manner.

●

Notes on marks, symbols and terminology used in this Manual

The marks shown below are used in this Manual to indicate Warning and Caution instructions.

Please carefully follow the instructions that are indicated by these marks, so that users or operators

are safe in using the instrument and that the instrument will not be damaged during operation.

！

WARNING

Instructions are given to avoid such potential hazardous situations that

instrument operators would be involved in a risk of facing death and/or

personal injury due to an electric shock or other reasons.

！

CAUTION

Instructions are given to avoid possible instrument damages due to incorrect

use/operation of the instrument.

●

This Instruction Manual comprises the following Chapters.

Please read the Manual from the very beginning, i.e., from Chapter 1, if you use this type of

instrument for the first time. Meanwhile, please advised that the instructions for the GPIB and

USB interface are included in a separate manual.

1. Introduction

This Chapter involves such information as overview, features, applications, functions

and operational principles of the instrument.

2. Preparations before using the instrument

Information is given in this Chapter on what should be done by users and other people

concerned before you use the instrument. The information includes installation of the

instrument.

3. Panels; indications and operations

Descriptions are provided in this Chapter on displays and basic operations of the

instrument as well as on keys, indications and other parts located on panels.

Please also read this Chapter while you operate the instrument.

4. Examples of applications

Wider ranges of operational procedures are described in this Chapter for some

applications.

5. Impedance display function (option)

Operation of the impedance display function is described.

6. Files

Descriptions are given for file formats.

7. Trouble-shooting

Error messages and their implications are described.

8. Maintenance

Procedures of performance testing of the instrument are described. Information on

storage, re-packaging and transportation is also provided.

Specifications

Instrument specifications are provided in regard to functions and performance.

Содержание FRA5087



































































































































































































Результаты поиска

Содержание FRA5087

Отзывы:

Похожие инструкции для FRA5087

Бренды по названию

Популярные бренды

NF FRA5087, Инструкция по эксплуатации

Результаты поиска

Содержание FRA5087

Отзывы:

Похожие инструкции для FRA5087

Бренды по названию

Популярные бренды