NF BP4610, Инструкция по эксплуатации

Страница: 36 / 218

2.5 Power on/off and Operation Check
BP4610 2-12
2.5 Power on/off and Operation Check
Once the connections have been completed, check the operation.
(1) Check whether the BP4610 is correctly connected as described heretofore.
(2) Switch the power switch of the BP4610 to on. Power is supplied and the BP4610 starts operating.
POWER
EXT SIGNAL IN
V
O
MONITOR OUT
I
O
O I
1/100 1V/10A
<1> Press the right side (|) of the POWER
switch.
POWER
EXT SIGNAL IN MONITOR OUT
V
O
I
O
O I
1/100 1V/10A
SEQUENCE TOP
MENU
START STOP HOLD LO
OUTPUT
CANCEL EN
BIPOLAR DC PO
MEASURE
<2> The LCD lights up and the startup screen is
displayed.
(3) The operation panel immediately after the power has been switched on shows the same setting
values as when the power was switched off the previous time. If the BP4610 is switched on for
the first time after it is purchased, the internal default settings are applied.
For the operation method to read the setting values saved in the memory, Refer to “4.7
Memory Functions”
.
(4)
To switch the power off, press the left side ( ) of the power switch after checking the OUTPUT
off status. As a result, the power supply to the BP4610 is disconnected and the power is switched
off.
Securely connect all the required cables. Improper connection may cause equipment failure.
Before switching the power off, be sure to check that OUTPUT is in the off status.
！
CAUTION