NF BP4610, Инструкция по эксплуатации

Страница: 6 / 218

BP4610 ii

Safety Precautions

To ensure safe use, be sure to observe the following warnings and cautions.
NF Corporation shall not be held liable for damages that arise from a failure to observe these warnings and
cautions.
This product is a Class 1 product (with protective conductor terminal) that conforms to the JIS and IEC
insulation standards.
Be sure to observe the contents of this instruction manual.
This instruction manual contains information for the safe operation and use of this product.
Be sure to read this information first before using this product.
All the warnings in the instruction manual must be heeded to prevent hazards that may cause major
accidents.
Be sure to ground the product.
This product uses a line filter and must be grounded to avoid the risk of electric shock.
To prevent electric shock, be sure to safely implement grounding according to Japanese Standard for
Electrical Equipment Technology D (Type 3) or higher.
Check the power supply voltage.
This product operates on the power supply voltage indicated in Grounding and Power Supply
Connection in this instruction manual.
Prior to connecting the power supply, check that the voltage of the power supply matches the rated
power supply of the product.
The rear part (vent) of the product may reach high temperatures when the product operates for a long
time with a heavy load. Be careful not to touch the rear part of the product to avoid burns.
All the accessories, peripherals, and options of this producdt are exclusively for this product. These
products are not to be installed nor used for any other purposes besides their intended usage.
To prevent electric shock and failure, absolutely never insert foreign objects or allow liquids inside this
product.
To prevent electric shock and failure, make sure that the metal parts of connection cables are hidden.
In case of suspected anomaly
If this product emits smoke, an abnormal smell, or abnormal noise, immediately power it off and stop
using it.
If such an anomaly occurs, do not use this product until it has been repaired, and immediately report the
problem to the location of purchase (either NF Corporation or your distributor).
Do not use this product when gas is present, as this may cause an explosion.