NF BP4610, Инструкция по эксплуатации

Страница: 26 / 218

2.2 Installation Environment
BP4610 2-2
2.2 Installation Environment
Observe the following points to ensure safe use of this product and maintain its reliability.
To prevent the BP4610 from falling over, set it on a floor that is flat, free of vibrations, and
sufficiently strong to withstand the weight of the BP4610 (26 kg per unit).
Make sure that the ambient temperature and ambient humidity fall within the ranges indicated in
the table below.
Performance
Guarantee
+5 to +35
°
C
5 to 85%RH
Absolute humidity of 1 to 25g/m
3
, with no condensation.
Storage
Conditions
−
10 to +50
°
C
5 to 95%RH
Absolute humidity of 1 to 29g/m
3
, with no condensation.
Setting the BP4610 in a location with remarkably high humidity will lower its reliability. Use in
an environment with 25
°
C and 50%RH is recommended.
Figure 2-1 shows the ambient temperature and the ambient humidity ranges.
− 10 0 10 20 30 40 50 ° C
Performance
%RH
90
80
70
60
50
40
30
20
10
0
Storage
Figure 2-1. Ambient Temperature and Ambient Humidity Ranges
Place the BP4610 so that its air intake (front) and air exhaust (rear) vents are at a distance of 50
cm or more from the nearest walls to ensure that the air circulation is not impeded and that forced
air cooling of the product functions fully.
Absolutely never place the BP4610 in the following locations.
Outdoors
Location exposed to direct sunlight