NF BP4610, Инструкция по эксплуатации

Страница: 195 / 218

8.4 Signal Sources
BP4610 8-5
8.4 Signal Sources
The signal source can be selected from among internal signal source, external signal source, and
internal signal external signal source.
Internal signal source
•
Current
Amplitude setting range:
±
115 V (0.01 V resolution) (CV mode)
±
10 A (0.001 A resolution) (CC mode)
Amplitude setting accuracy:
±
(|0.5% of setting value| + 0.2 V) (CV mode,
AC 0 V, 23
Ω
resistance load, DC only, 23
±
5
°
C)
±
(|0.5% of setting value| + 0.03 A) (CC mode,
AC 0 A, DC only, 23
±
5
°
C)
•
Superimposed AC
Waveform: Sine, square, arbitrary (16 types)
Frequency setting range: 1 Hz to 100 kHz (0.1 Hz resolution)
Frequency accuracy:
±
100 ppm
Amplitude setting range: 0 to 120 Vp-p (0.1 Vp-p resolution) (CV mode)
0 to 30 Ap-p (0.01 Ap-p resolution) (CC mode)
Amplitude setting accuracy: ± (0.5% of setting value + 0.2 Vp-p) (CV mode,
DC 0 V, AC only 500 Hz square wave, 23 ± 5 ° C)
±
(0.5% of setting value + 0.03 Ap-p) (CC mode,
DC 0 A, AC only 500 Hz sine wave, 4 Ω resistance load,
23
±
5
°
C)
External signal input
Gain: 100
×
(100 V/1 V), in phase (CV mode)
10
×
(10 A/1 V), in phase (CC mode)
Gain accuracy:
±
5% (1 kHz)
Input impedance: 10 k Ω
Non-destructive max. input voltage:
±
5 V
Input terminal: BNC connector (front panel)
Frequency range: DC to 200 kHz