NF BP4610, Инструкция по эксплуатации

Страница: 209 / 218

9.1 Initial Setting List
BP4610 9-1
9.1 Initial Setting List
“
√
” indicates the fact that the initial setting is applied. “-” indicates that the setting until now is
maintained.
Table 9-1. Setting Memory
(1/2)
Setting Item Initial Value At Shipping At Power-on After Reset
Operation mode CV-INT
√
Backup value
√
Output OFF
√
Depends on output
on/off setting at
power-on (Reset is possible
only when output is
off)
Response calibrator OFF
√
Depends on
response calibrator
on/off setting at
power-on
−
DC voltage 0.00 V
√
Backup value
√
DC current 0.000 A
√
Backup value
√
Superimposed AC voltage 0.0 Vp-p
√
Backup value
√
Superimposed AC current 0.00 Ap-p √ Backup value √
Frequency 50.0 Hz √ Backup value √
Waveform SIN
√
Backup value
√
+ voltage limiter 62.0 V
√
Backup value
√
−
voltage limiter
−
62.0 V
√
Backup value
√
+ current limiter 26.0 A √ Backup value √
−
current limiter
−
26.0 A
√
Backup value
√
USB ID 2
√
Backup value
−
Keylock OFF
√
Backup value
−
Beep ON √ Backup value −
LCD contrast 55 √ Backup value −
LCD display color BLUE
√
Backup value
−
Frequency unit Hz
√
Backup value
−
Time unit s √ Backup value −
Output on/off at power-on OFF √ Backup value −
Response calibrator on/off at power-
on
OFF √ Backup value −
External control input enable/disable DISABLE √ Backup value −
Arbitrary waveform transmit/receive,
control memory specification
2 (ARB1) √ √ −
SRQ enable register 179 √ √ −