NF BP4610, Инструкция по эксплуатации

Страница: 96 / 218

4.5 Sequence Operation
BP4610 4-46
<Step 2 setting>
<10> Press the and keys to move the cursor to [STEP].
<11> Press the
ENTER
key to display the Modify box.
<12> Press
the and keys to move the cursor to the right-most digit, and then turn the
[MODIFY] dial to set “2”.
<13> Press the
ENTER
key to apply the set value.
<14> Press the key to move the cursor to [TIME].
<15> Press the
ENTER
key to display the Modify box.
<16> Press
the and keys to move the cursor to the fourth digit from the right and then turn
the [MODIFY] dial to set “2” (thus setting 0.2 s).
<17> Press the
ENTER
key to apply the set value.
<18> Using the same operation as in steps <2> to <5>, set DC VOLT = 2.5, and using the same
operation as in steps <6> to <9>, set the DC voltage operation type to “KEEP”.
Then go on to set Step 3 and subsequent steps using the same procedure.