NEXPEED NBG440 User’s Manual
NexComm Systems, Inc. 14 PAGE
CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication
line cord.
ATTENTION
Pour réduire les risques d’incendie, utiliser uniquement des conducteurs de
télécommunications 26 AWG au de section supérleure.
Connecting LINE(SHDSL) Port
1>
Plug the RJ-45 connector (to be connected to the 4th and 5th pins or 1st and 2nd)
pins into one pair (or two pairs) of regular telephone lines preinstalled for the SHDSL
connection and, use a tool to achieve a correct assembly.
2>
Connect the assembled RJ-45 connector to the port named "LINE" in the back of the
NBG440 unit.
Note:
Among the front panel LEDs, the LED named
S0
and
S1
, will be turned on when
the router is ready for a normal communication.
Connecting Console Port
You can change the setting in the console to modify the functionality of the NBG440 unit.
1>
Check if there is a console cable in the purchased product box.
2>
Connect the DB9 male connector to the port named "CONSOLE" in the back of the
NBG440 unit.
3>
Connect the DB9 female connector, which is the other end of the cable, to the
computer’s COM port.
4>
Run any communications program that supports vt100 emulation(HyperTerminal or
Zterm) to communicate directly with the router through the computer’s COM port.
Note:
If random or illegible characters appear on your display, you probably have a
communications-setting problem. Mask sure that your communications software is
configured as follows :
