New Leader Hi-Way SUPER P, Руководство оператора

Страница: 39 / 50

- 39 -
SUPER P
www.NewLeader.com
(800) 363-1771
301321-AA-I
General Operating Procedures Continued
Auxiliary Engine Driven Units
Engine Preparation
Never fill the tank with the engine running. Avoid spilling gasoline on a hot engine. This
could cause an explosion and serious injury� Do not smoke while handling gasoline� Failure
to follow this requirement may result in injury or machine damage�
Release the two clamps holding the engine hood and swing the hood rearward and downward� Check the
crankcase oil level� Refer to Lubrication Chart for details� Refer to engine manufacturer’s manual for the
proper amount and grade of oil� Fill crankcase as required�
Fill the fuel tank according to engine manual� Make sure the fuel shut-off valve is open if so equipped�
Starting Starter-Alternator-Type Engines
ENGINE THROTTLE
SPREADER
START
ON
OFF
CHOKE RUN
OFF
SPOT
ENGINE SWITCH
WITH LED INDICATOR
THROTTLE SWITCH
WITH LED INDICATOR
SPREADER SWITCH
WITH LED INDICATOR
Figure 2 – Control Panel
Engine switch - Starts and stops engine�
Throttle switch - Controls engine speed�
Push top of switch to choke—light illuminates when engine in choke.
Back off from choke to run RPM�
Spreader switch - Controls conveyor and spinner function—light illuminates when spreading.
Run - Maintained switch for continuous spreading�
Off - Turns both conveyor and spinner off�
Spot - Momentary switch for “spot” spreading�