New Leader Hi-Way SUPER P, Руководство оператора

Страница: 41 / 50

- 41 -
SUPER P
www.NewLeader.com
(800) 363-1771
301321-AA-I
Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation� Failure to comply with this requirement could result in death or
serious injury�
Drive Chains
Make sure truck engine is shut down when working on drive chain� Failure to follow this
warning may result in injury or machine damage�
Twice a year remove drive chains� Soak chain in a solvent to remove all old or contaminated oil� Check
chain for any frozen links. Soak chain in SAE 10 oil. Soak chain until, when flexed, no bubbles appear on
chain� Reinstall chains� Chain should be tensioned enough to prevent whipping at operating speed� Over-
tensioning of chain will create excessive heat that will freeze chain or cause damage to other parts of drive
system�
Engine
Refer to engine maintenance instructions furnished by engine manufacturer�
Hydraulic System
The use of proper oil in the hydraulic system is one of the most important factors for satisfactory operation�
Utmost cleanliness in handling the oil cannot be stressed enough. Keep the hydraulic oil in original closed
containers, clean top of container before opening and pouring, and handle in extremely clean measures and
funnels�
Refer to the Lubricant and Hydraulic Oil Specifications section of the manual for selection of the proper
hydraulic fluid for use in the hydraulic system.
DO NOT check leaks with hands while system is operating as high pressure oil leaks can be
dangerous! If skin is pierced with hydraulic fluid at high pressure seek immediate medical
attention as fluid injected into the skin could cause gangrene if left untreated. Relieve
pressure before disconnecting hydraulic lines or working system. Make sure all hydraulic fluid
connections are tight and all hydraulic hoses and lines are in good condition before applying
pressure to the system� Wear protective gloves and safety glasses or goggles when working
with hydraulic systems� Failure to comply with this requirement could result in death or serious
injury�
DO NOT check for leaks adjacent to moving parts while system is operating as there may
be danger of entanglement! Failure to comply with this requirement could result in death or
serious injury�
Lubrication and Maintenance
Preventative Maintenance Pays!
The handling and spreading of commercial fertilizers is a most severe operation with respect to metal
corrosion� Establish a frequent, periodic preventative maintenance program to prevent rapid deterioration to
spreading equipment� Proper cleaning, lubrication and maintenance will yield longer life, more satisfactory
service and more economical use of your equipment�
Shut off all power and allow all moving parts to come to rest before performing any
maintenance operation� Failure to comply with this requirement could result in death or
serious injury�