New Leader Hi-Way SUPER P, Руководство оператора

Страница: 33 / 50

- 33 -
SUPER P
www.NewLeader.com
(800) 363-1771
301321-AA-I
General Description
The Super P and Super P-HC are hopper-type spreaders and in many respects smaller versions of the Hi-
Way Model E2020XT� They are intended for spreading abrasives and de-icing products for the control of
snow or ice� The units can be mounted into a pick-up truck�
The Super P and Super P-HC are both offered with two different drive options, standard gas engine drive
or optional hydraulic drive� Both spreaders are offered with two conveyor options, standard #1 bar chain
conveyor, or optional Belt-Over-Chain (BOC) conveyor�
Options:
• The engine options are a 10�5 HP Briggs & Stratton (Super P ONLY) or 11 HP Honda (Super P or Super
P-HC) four-cycle gasoline engine mounted at the rear� The engine drives a 20:1 worm gear case� The
spinner is driven from the input shaft of the worm gear and the conveyor is driven from the output
shaft� Variable speed control is obtained by the use of an electric throttle�
• The hydraulic options are single motor, dual motor or direct drive� The spinner is driven from the input
shaft of a 20:1 worm gear case or directly driven by a hydraulic motor� The conveyor is driven from
the output shaft of the worm gear or a hydraulic motor� Spinner and conveyor speed are adjusted by
means of control valves�
The Super P with standard gas engine drive and #1 bar chain conveyor is designed to spread straight sand
or a salt/sand mixture only� When applying straight salt, a BOC conveyor is required�
The Super P with optional dual hydraulic drive and #1 bar chain conveyor is designed to spread straight
sand, a salt/sand mixture, or straight salt�
The conveyor runs the full length of the hopper bottom to deliver material through an adjustable feedgate
to the spinner�
The spinner hopper has two internal baffles and three external baffles for adjusting the spread to the
desired pattern�
This product is intended for commercial use only�