Netopia 430 S/T, Справочное руководство

Страница: 9 / 276

1-2 Netopia ISDN Router Reference Guide
How to use this guide
This guide is organized into chapters describing each of the Netopia
ISDN Router’s advanced features. You may want to read each
chapter’s introductor y section to familiarize yourself with the various
features available.
You can also use this summar y to locate relevant sections:
■
To configure ISDN setup parameters such as Switch Type, SPIDs,
and Director y Numbers, see
“ISDN Line Configuration” on
page 2-3 .
■
To add or modify connection profiles, see “Adding a connection
profile” on page 2-9 .
■
To configure the answer profile, see “Configuring profiles for
incoming calls.” on page 2-30 .
■
To put the advanced configuration changes into effect, “Resetting
the system” on page 10-2 .
■
To manually establish a connection with an existing connection
profile, see
“Manually initiating a connection” on page 2-40 .
400 Netopia series
models
■
To use the AppleTalk Update-Based Routing Protocol (AURP), see
“AURP setup” on page 6-13 .
■
To schedule regular or one-time connections, see “Scheduled
connections” on page 2-34 .
■
To configure dynamic IP address ser vice (DHCP, MacIP, or
BOOTP), see
“IP address ser ving” on page 4-18 .
■
For testing network connections, see “The ISDN loopback test”
on page 10-3 to test the ISDN line, and “Ping” on page 10-5 to
test connections to IP hosts.
■
For IP filters, see “About filters and filter sets” on page 7-9 and
“Working with IP filters and filter sets” on page 7-19 .
■
To transfer firmware and configuration files, see “Transferring
configuration and firmware files with TFTP” on page 10-16 or
“XMODEM” on page 10-10 .