Netopia 430 S/T, Справочное руководство

Страница: 240 / 276

D-2 Netopia ISDN Router Reference Guide
About SPIDs
Depending on the type of ISDN switch protocol you use, you may be
required to enter SPIDs in the ISDN Line Configuration screen.
Generally, SPIDs are used with Nor th American (United States and
Canada) switch protocols.
The exact format of ISDN SPIDs is sometimes a point of confusion.
This is because several formats exist, and some formats allow
variations.
The table below displays the general SPID formats for the types of
Nor th American ISDN switch protocols suppor ted by the Netopia
ISDN Router. The formats shown are a subset of possible SPID
formats, but in most cases they should work.
In the following table, xxxxxxx represents the director y number
assigned to your ISDN line, and yyy represents your area code.
Note: AT&T 5ESS custom point-to-point switches have no SPIDs
and are not represented in the table above. However, this type of
switch configuration is suppor ted by the Netopia ISDN Router.
Switch SPID format
AT&T 5ESS cus-
tom (multipoint)
01xxxxxxx0
Nor thern Telecom
DMS-100 custom
yyyxxxxxxx1 and yyyxxxxxxx2
or
yyyxxxxxxx01 and yyyxxxxxxx02
National ISDN-1
on AT&T 5ESS
(multipoint)
01xxxxxxx000
National ISDN-1
on Nor thern
Telecom DMS-100 yyyxxxxxxx100 and yyyxxxxxxx200
or
yyyxxxxxxx0100 and yyyxxxxxxx0200