Netopia 430 S/T, Справочное руководство

Страница: 97 / 276

5-6 Netopia ISDN Router Reference Guide
4. To change the default path delay, select Ethernet Path Delay
and enter a value (in ticks). This value is used to determine the
por t cost of using the Ethernet por t in IPX RIP calculations.
5. To enable NetBIOS packet for warding, select Ethernet NetBIOS
Packet Forwarding and toggle it to Yes . This parameter will
determine whether “IPX Packet type 20” packets are for warded
on the Ethernet inter face. These packets are used by NetBIOS
and some other applications.
6. Select Ethernet Incoming SAP Filter Set to filter incoming IPX
SAP adver tisements on the Ethernet. By attaching an incoming
SAP filter on the Ethernet, you can restrict the number of SAP
entries learned on a large IPX network to only those required by
remote users connecting to the Netopia ISDN Router via the
ISDN. An Ethernet SAP filter
must be used with networks that
have so many ser vers adver tised that the Netopia ISDN Router
would other wise exhaust its internal memor y storing ser ver
entries.
To attach a SAP filter set, first define the filter set using the
Filters and Filter Sets option (see step 8 below). Then select
the filter set from the Ethernet Incoming SAP Filter Set pop-up
menu. To detach the filter set, select Detach Filter Set .
7. Select Default Gateway Address , and enter the network
address of the IPX network to which all packets of unknown
destination address should be routed.
Note: The Default Gateway Address is usually set up to match
the IPX Address in your Network Connection Profile.
8. To configure filters and filter sets, select Filters and Filter Sets
and go to the IPX filters and filter sets screens. For information
on how to configure IPX filters and filter sets, see
“IPX filters”
on page 5-11 .