Netopia 430 S/T, Справочное руководство

Страница: 211 / 276

10-18 Netopia ISDN Router Reference Guide
bytes transferred.
To download a configuration file
The Router can be configured by downloading a configuration file
using TFTP. Once downloaded, the file reconfigures all of the
Router’s parameters as if someone had manually done so through
the console por t.
To download a configuration file, follow these steps:
■
Select TFTP Server Name and enter the DNS name or IP
address of the TFTP ser ver you will use. The DNS name or IP
address is available from the site where the ser ver is located.
■
Select Config File Name and enter the name of the file you will
download. The name of the file is available from the site where
the ser ver is located. You may need to enter a file path along
with the file name (for example, bigroot/config/myfile).
■ Select Read Config Now and press Return. You will see the
following dialog box:
+-----------------------------------------------------------+
+-----------------------------------------------------------+
| |
| Are you sure you want to read the configuration now? |
| The device will reset when the transfer is complete. |
| |
| CANCEL CONTINUE |
| |
+-----------------------------------------------------------+
■
Select CANCEL to exit without downloading the file, or select
CONTINUE to download the file. The system will reset at the
end of the file transfer to put the new configuration into effect.
■
If you choose to download the configuration file, the TFTP
Transfer State item will change from Idle to Reading Config .
The TFTP Current Transfer Bytes item will reflect the number of