Netopia 430 S/T, Справочное руководство

Страница: 29 / 276

2-14 Netopia ISDN Router Reference Guide
■
To enable NetBIOS Packet Forwarding , toggle the selection to
Yes .
■
Select Incoming Packet Filter Set , to attach a filter set for
filtering incoming packets and choose a filter set from the list.
■
Select Outgoing Packet Filter Set , to attach a filter set for
filtering outgoing packets and choose a filter set from the list.
■
Select Incoming SAP Filter Set ,to attach a filter set for filtering
ser ver entries within incoming Ser vice Adver tising Protocol
(SAP) packets and choose a filter set from the list.
■
Select Outgoing SAP Filter Set ,to attach a filter set for filtering
ser ver entries within outgoing Ser vice Adver tising Protocol
(SAP) packets and choose a filter set from the list.
■
Select Periodic RIP Timer , and enter a new value (in seconds)
to change the periodic RIP timers default value.
■
Select Periodic SAP Timer , and enter a new value (in seconds)
to change the periodic SAP timers default value.
■
Hit Escape to go back to the Add Connection Profile screen
when you are finished configuring
IPX Profile Parameters .
For more information on creating an IPX filter set, go back to the
Advanced Configuration screen and select the Filter Sets (Firewalls)
screen. Also refer to Chapter 6. IPX Setup.
Setting up Number to Dial ■
Select Number to Dial and enter the director y number (the
number of the ISDN line) of the network being called.
Setting up authentication ■
Select PPP/MP Options and go to the PPP/MP Options screen.
Point-to-Point Protocol (PPP) and Multilink Point-to-Point Protocol
(MP) allow the Netopia ISDN Router to make adaptable and